Table 18-1 Log Settings - ZyXEL Communications Prestige 660W Series User Manual

LABEL
Address Info
Mail Server
Mail Subject
Send log to
Send alerts to
UNIX Syslog
Active
Syslog IP Address
Log Facility
Send Log
Log Schedule
Day for Sending Log
Time for Sending Log
Logs Screens

Table 18-1 Log Settings

Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
e-mail.
Type a title that you want to be in the subject line of the log e-mail message that the
Prestige sends.
Logs are sent to the e-mail address specified in this field. If this field is left blank,
logs will not be sent via e-mail.
Alerts are sent to the e-mail address specified in this field. If this field is left blank,
alerts will not be sent via e-mail.
Syslog logging sends a log to an external syslog server used to store logs.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to the documentation of your
syslog program for more details.
This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
•
Daily
•
Weekly
•
Hourly
•
When Log is Full
•
None.
If you select Weekly or Daily, specify a time of day when the E-mail should be sent.
If you select Weekly, then also specify which day of the week the E-mail should be
sent. If you select When Log is Full, an alert is sent when the log fills up. If you
select None, no log messages are sent
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Prestige 660W/HW Series User's Guide
DESCRIPTION
18-3