ZyXEL Communications Prestige 660W Series User Manual page 379

FIELD
Once: If you selected Once in the How Often field above, then enter the date
the set should activate here in year-month-date format.
Date
Weekday: If you selected Weekly in the How Often field above, then select the
day(s) when the set should activate (and recur) by going to that day(s)
Day
and pressing [SPACE BAR] to select Yes, then press [ENTER].
Start Time Enter the start time when you wish the schedule set to take effect in
hour-minute format.
Duration Enter the maximum length of time this connection is allowed in hour-
minute format.
Action Forced On means that the connection is maintained whether or not
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line. Disable Dial-On-Demand means that this schedule
prevents a demand call on the line.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.
Call Scheduling
Table 40-1 Menu 26.1 Schedule Set Setup
DESCRIPTION
Prestige 660W/HW Series User's Guide
EXAMPLE
2000-01-01
Yes
No
N/A
09:00
08:00
Forced On
40-3