Panasonic AJ-HPX3700G Operating Instructions Manual page 180

!"#$%&'())*#+,-.+/012345677899.0)9:;<99=>>?@A>BACDEFGDEHIJKL?M
" When shooting with the MASTER GAIN set to "–3dB",
coloring phenomena may occur in portions of the video
with high brightness.
The coloring phenomena can be reduced by switching the
OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE
OFF], setting the MANUAL KNEE menu option of the
<KNEE/LEVEL> screen to "ON", and then changing the
following menu options.
– When "HD", "SD", "FILMLIKE1", "FILMLIKE2" or
"FILMLIKE3" has been selected in the GAMMA MODE
SEL menu option of the <GAMMA> screen, reduce the
value in the KNEE MASTER SLOPE menu option of the
<KNEE/LEVEL> screen.
– When "FILM-REC" has been selected in the GAMMA
MODE SEL menu option of the <GAMMA> screen,
reduce the value in the F-REC DYNAMIC LVL menu
option of the <GAMMA> screen.
– When "VIDEO-REC" has been selected in the GAMMA
MODE SEL menu option of the <GAMMA> screen,
reduce the value in the V-REC KNEE SLOPE menu
option of the <GAMMA> screen.
180
Menu: Menu Description Tables
MID SETTING
Items/ Adjustable
Data Saved Range
!MASTER GAIN –3dB Select the master gain from –3, 0, 3, 6,
:
9, 12, 15, 18, 21, 24, 27, or 30 dB.
3dB
:
30dB
S C U F –
H.DTL LEVEL 00 For performing the horizontal detail
:
correction level setting.
08
:
63
S C U F –
V.DTL LEVEL 00 For performing the vertical detail
:
correction level setting.
12
:
31
S C U F –
DTL CORING 00 For performing the noise elimination
:
level setting for detail.
12
:
60
S C U F –
For performing the horizontal detail
H.DTL FREQ. 00
:
frequency selection.
18
:
31
S C U F –
LEVEL DEPEND. 0 For setting the LEVEL DEPEND.
1
When the Y-detail is emphasized, details
:
of dark sections are compressed.
5
If the numerical value is larger, details of
bright sections are also compressed.
S C U F –
MASTER 0.30 For setting the master gamma. (0.01
GAMMA :
step)
0.45
:
0.75
S C U F –
For setting the gamma curve for the dark
BLACK GAMMA –8
:
portion.
OFF
–8 to –1:
:
+8
OFF:
+1 to +8:
S C U F –
B.GAMMA 1 For setting the upper limit of
RANGE 2
compression/expansion.
3
1:
2:
3:
S C U F R
For selecting the color correction table
!MATRIX OFF
TABLE A
for the linear matrix.
B
S C U F –
For switching on/off of the 12-axis
!COLOR ON
CORRECT OFF
independent color correction.
S C U F –
Remarks
The dark portion is compressed.
Standard state
The dark portion is extended.
Approximately 20%
Approximately 30%
Approximately 40%