Yamaha WR25RB Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
when the vehicle is stopped. To stop
and/or resume counting, repeat steps 2
and 3.
1
Auto start
2
1. Push the "SELECT 1" button for at
least two seconds to set the auto
3
start.
TIP
4 When the stopwatch is set to auto start,
the stopwatch indicator " " and the
distance-compensation tripmeter indi-
5
cator " " will start flashing, and the dig-
its in the display will start scrolling from
6
left to right.
7
8
9
2. When the vehicle starts moving,
the stopwatch will start counting.
3. Push the "SELECT 1" button and
"SELECT 2" button together to
stop the stopwatch.
4. To resume counting, push the "SE-
LECT 1" button and "SELECT 2"
button together again.
TIP
The stopwatch will continue counting
when the vehicle is stopped. To stop
and/or resume counting, repeat steps 3
and 4.
Measurement mode (for calibrating
the distance-compensation tripme-
ter's reading)
The distance-compensation tripmeter
is a feature intended to provide a more
accurate tripmeter reading for enduro
riding. Calibrating this meter in accor-
dance with the distances specified on
the enduro course map will help famil-
iarize the rider with the course. In addi-
tion, calibrating the meter may also be
necessary when using tire, wheel,
chain sprocket sizes, etc. other than
specified. For further information con-
cerning the use of this meter, please
consult your nearby Yamaha dealer.
Calibrate the distance-compensation
4-7
tripmeter as follows.
To increase the reading, push the "SE-
LECT 1" button. To decrease the read-
ing, push the "SELECT 2" button.
Pushing and holding either button will
increase or decrease the reading con-
tinuously until the button is released.
TIP
Calibrating the reading of the dis-
tance-compensation tripmeter is possi-
ble regardless of the
operation.
Resetting the distance-compensa-
tion tripmeter or the distance-com-
pensation tripmeter in combination
with the stopwatch
TIP
Resetting can be made only to the dis-
tance-compensation tripmeter or to the
distance-compensation tripmeter
combination with the stopwatch.
Resetting the distance-compensation
tripmeter
1. Check that the stopwatch mea-
surement is in operation.
stopwatch
in