Engine Start Procedures - Bavaria 46 2013 Information & Operation Manual

4. Engine start procedures.

Make sure engine is in neutral.
•
• Press the ignition switch then press the start button until you hear the engine running.
When the engine is running check to make sure you have water coming out of the
•
exhaust.
To stop the engine press the stop button until the engine has stopped.
•
An alarm will sound after you stop the engine. Press the ignition once more to turn off the
•
ignition
Ignition button
Mute button
Should you hear an engine alarm during operation, check the tachometer to identify
the reason for the alarm (over heating/oil pressure etc) immediately shut down the
engine-CALL HORIZON
All our yacht engines run with diesel fuel. There is a diesel filler cap above the
Engine start panel which is clearly marked "DIESEL"....
HERE.
MAXIMUM ENGINE REVS ARE 2000 RPM
Start button
Stop button
DO NOT PUT WATER IN