Maintenance - Matsui MTT667WS Instruction Book

6

Maintenance

Levelling the Table Top Fridge
Make sure the Appliance is level. Use the rotating levelling
feet at the front. If the Appliance is not level, the doors and
magnetic seal alignments will be affected and may cause you
Appliance to work incorrectly.
Do Not Turn on the Table Top Fridge for 2
Hours
After the Appliance has been placed it needs to be left for 2
hours. This allows time for the coolant to settle.
Servicing
Repairs and maintenance of the appliance should only be
performed by an authorised, qualified technician.
The Table Top Fridge is not working
• Check it is plugged in and switched on.
• Check that the fuse in the plug has not blown.
• Plug in another appliance, such as a lamp, to see if the
socket is working.
Condensation appears on the outside of the
Table Top Fridge
This may be due to a change in the room temperature. Wipe off
any residue of moisture. If the problem continues call the
Customer Service Department.
Noises
You may hear some unusual noises from time to time. See 'Noises
inside the Appliance' on page 3. However if your Appliance
begins to make noises you have not heard before call the
Customer Service Department.
If you are not able to identify and eliminate the faults according to
the above recommendations, contact the Customer Service
Department, advising of model number of the appliance which is
shown on the back of the rating plate.
Do not attempt to repair your Appliance yourself as it might
.
endanger you and others
Moving your Table Top Fridge
Care when handling
Hold the Appliance around its sides or base when moving
it. Under no circumstance should it be lifted by holding the edges
of the Top surface.
Location
Do not place your Appliance near a heat source,
e.g. cooker, boiler or radiator. Also avoid direct sunlight in
outbuildings or sun lounges.
Safety
WARNING!
It is hazardous for anyone other than authorised
service personnel to carry out servicing or
repairs which involves the removal of covers.
To avoid the risk of an electric shock do not
attempt to repair this appliance yourself.
Disposal
Old appliances still have some residual value. An environmentally
friendly method of disposal will ensure that valuable raw materials
can be recovered and used again. The refrigerant used in your
appliance and insulation materials require special disposal
procedures. Ensure that none of the pipes on the back of the
appliance are damaged prior to disposal. Up to date information
concerning options for disposing of your old appliance and
packaging from the new one can be obtained from your local
council office.
Locks
If your Appliance is fitted with a lock, to prevent children
being entrapped keep the key out of reach and not in the vicinity
of the appliance.
If disposing of an old Appliance break off any old locks or
latches as a safeguard.