PACKAGE CONTENTS
Your EW-1000 comes with the following items in the box. Please locate all of
the following:
1.
The EW-1000 Scooter
2.
48V Battery Charger
3.
Tool Kit
4.
20amp Fuse(s)
5.
Product Handbook
6.
Seat & Seat Post
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your EW-1000
Assembly
1. Carefully remove the EW-1000 from the
box.
2. To unfold the EW-1000 begin by pressing
down on the FOLDING HANDLE with one
hand (Fig.1), while gently pulling up on the
handlebars with the other (Fig.2)
3. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place (Fig. 3).
4. Attach the handlebars by first attaching the
large handlebar clamp to the top of the
handlebar down tube.
handlebars to the clamp. Tighten all bolts
after adjusting the handlebars to the
desired tilted position. (Fig. 4)
5. The BRAKE LEVER is in the down position
for shipping. Using the provided Allen
Wrench, loosen the tension bolt, and adjust
the levers to a comfortable position.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
Page7
Then attach the