Step 1 Preparing The Speakers - Panasonic SC-PT980 Operating Instructions Manual

step 1 Preparing the speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 22.
[PT980]
2 Front speakers
2 Surround speakers
4 Stands (with cable)
4 Bases
8 Screws (without washer) A
4 Screws (with washer) B
Front and surround speakers
[PT980]
1
2
Leave about 80 mm.
Front speakers
[PT580]
1
2
Leave about 120 mm.
[PT580] Speaker assembly option
Thread the speaker cable through
the base.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 22.
6
A
B
Back of the base
Screw B
Position the cable
between the ridges.
Attach the speaker.
Leave about
120 mm.
[PT580]
2 Front speakers
2 Stands (with cable)
2 Bases
8 Screws
Pull the cable
straight along
the line and slide
into the groove.
Screw A
Insert the wire fully.
i: White
j: Blue line
Push!
Press into the groove.
Tighten securely.
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Press into the groove.
Tighten securely.
2
Tighten
securely.
1
2
1
Push!
Slide into the
groove.