Step 1: Preparing The Speakers; Assembling The Speakers [Bt735] - Panasonic SC-BT230 Operating Instructions Manual

STEP 1: Preparing the speakers

Assembling the speakers
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
2 Front speakers
2 Surround speakers
1
2
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

VQT2Q56
12
[BT735]
4 Stands (with cables)
Back of the base
Screw B
Leave about 80 mm




Preparation
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 41.
≥ Keep the screws out of reach of children to prevent
swallowing.
4 Bases
Pull the cable
straight along
the line and
slide into the
groove.
Screw A
Insert the wire fully.
r: White
s: Blue line
Push!
Press into the groove.
Tighten securely.
A String (not included)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not included)
D Wall
E Approx.150 mm
8 Screws A 4 Screws B
A B
Tighten
2
securely.
1