Step 1 Preparing The Speakers - Panasonic SC-XH70 Operating Instructions Manual

step 1 Preparing the speakers
Front speakers
[XH75]
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not supplied).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 20.
2 Front speakers
1

2

Leave about 120 mm.
Speaker assembly option
Thread the speaker cable through
the base.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 20.
Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls or
pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
≥ Use a string of less than ‰2.0 mm, which is capable of supporting over
10 kg.
6
2 Stands (with cable)


Position the cable
between the ridges.
Attach the speaker.
Leave about
120 mm.
2 Bases


Slide into the groove.

Tighten securely.

Insert the wire fully.
i: White
j: Blue line
Push!

Press into the groove.

Tighten securely.

Insert the wire fully.
i: White
j: Blue line

Press into the groove.

Tighten securely.

String (not supplied)
Thread from the wall to the speaker and tie tightly.
Speaker (rear)
Caution
≥ Do not stand on the base. Be cautious when children are near.
≥ When carrying the speaker, hold the stand and base parts.
8 Screws
2
1
Push!
Slide into the
groove.
Screw eye
Wall
(not supplied)
Approx.
150 mm