Step 1 Preparing The Speakers - Panasonic SC-PT980 Operating Instructions Manual

SC-PT980-580G-RQTX1115_eng.book Page 6 Monday, February 8, 2010 3:25 PM
step 1 Preparing the speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 22.
[PT980]
2 Front speakers
2 Surround speakers
4 Stands (with cable)
4 Bases
8 Screws (without washer) A
4 Screws (with washer) B
Front and surround speakers
[PT980]
1
2
Leave about 80 mm.
Front speakers
[PT580]
1
2
Leave about 120 mm.
[PT580] Speaker assembly option
Thread the speaker cable through
the base.
Leave about
120 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 22.
6
A B
Back of the base
Pull the cable
straight along
the line and slide
into the groove.
Screw B
Tighten securely.
Position the cable
between the ridges.
Attach the speaker.
[PT580]
2 Front speakers
2 Stands (with cable)
2 Bases
8 Screws
Tighten
Screw A
securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Press into the groove.
Tighten securely.
Slide into the groove.
Insert the wire fully.
i: White
j: Blue line
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Press into the groove.
Tighten securely.
Slide into the
groove.
2
1
2
1