NTSC DISC OUT
Choose PAL 60 or NTSC output when playing NTSC discs (
21, Video
systems).
≥ NTSC: When connected to an NTSC TV.
≥ PAL60: When connected to a PAL TV.
[For[Southeast]Asia]: “NTSC” is the factory preset.
STILL MODE
Specify the type of picture shown when paused.
≥ AUTO
≥ FIELD:
The picture is not blurred, but picture quality is lower.
≥ FRAME:
Overall quality is high, but the picture may appear blurred.
AUDIO menu
Select to suit the type of equipment you connected to the HDMI AV OUT
terminal.
Select “BITSTREAM” when the equipment can decode the bitstream
(digital form of 5.1-channel data). Otherwise, select “PCM”.
(If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.)
DOLBY DIGITAL
§
≥BITSTREAM
≥PCM
DTS
§
≥BITSTREAM
≥PCM
[For[the[Middle[East,[Australia,]N.Z.,]India]and]Nigeria]
MPEG
§
≥BITSTREAM
≥PCM
When audio is output from HDMI AV OUT terminal, and the
§
connected equipment does not support the item selected, the actual
output will depend on the performance of this connected equipment.
DYNAMIC RANGE
≥ ON:
Adjusts for clarity even when the volume is low. Convenient for
late night viewing. (Only works with Dolby Digital)
≥ OFF
SPEAKER SETTINGS
Select the delay time of the speakers.
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
Actual speaker position
C
:
C
L
R
Ideal speaker position
:
SW
Primary listening
:
distance
Approximate room dimensions
LS
RS
LS
RS
Circle of constant primary listening distance
If either distance a or b is less than c, find the difference in the table
and change to the recommended setting.
a Center speaker
b Surround speaker
Difference (Approx.)
Setting
Difference (Approx.)
Setting
30 cm
1ms
150 cm
5ms
60 cm
2ms
300 cm
10ms
90 cm
3ms
450 cm
15ms
120 cm
4ms
150 cm
5ms
≥ SETTINGS:
≥ C DELAY (Center Delay):
0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥ LS/RS DELAY (Left Surround/Right Surround Delay):
0ms, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥ TEST TONE: SETTING
This item is only displayed when “DVD/CD” is selected.
Use the test tone for speaker level adjustments (
11, Adjusting
the speaker output level manually).