Service / Warranty - Gardena EasyCut Li-18/23 R Operating Instructions Manual

Battery charger
Mains voltage
Max. output current
Output voltage
Measuring process complying with
measured according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can
also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.

11. Service / Warranty

Warranty:
1) DIN EN 60335-2-91 2) RL 2000/14/EC
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults.
Under warranty we will either replace the unit or repair it free of
charge if the following conditions apply:
• The unit must have been handled properly and in keeping with
the requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
As wear parts, the blade and blade holder are excluded from the
warranty.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If you have any problems with this product, please contact
our Service or return the defective unit together with a short
description of the problem – in case of guarantee, with a copy
of the receipt – postage paid to one of the GARDENA Service
Centres listed on the back of this leaflet.
230 V / 50 – 60 Hz
600 mA
18 V (DC)
3) DIN EN 786. The stated vibration emission value has been
21