Restore Full Defaults; Restore Partial Defaults; Obwi Tab; Osd - Emerson Avocent User Manual

32 .....Avocent® Matrix High Performance KVM Switching System
To load system settings:
1. On the sidebar under Load Settings from File, click Load .
2. Click Next on the warning.
3. Browse to the path where the file is stored.
4. Enter the encryption password, if necessary, and click Next .
5. Click Reboot to reboot the switch.

Restore full defaults

The restore full defaults option will restore the switch to the full factory defaults, including the
network settings. All user accounts will be deleted and all settings on the transmitters and receivers
will also be reset to default. The restore will require the system to be rebooted.

Restore partial defaults

The restore partial defaults option will restore the switch to factory defaults excluding the network
settings. All user accounts will be deleted and all settings on the transmitters and receivers would
also be reset to default. The restore will require the system to be rebooted.

OBWI tab

The OBWI tab is for configuring the OBWI inactivity timeout, the OBWI banner and the Help URL. If
the OBWI user has not interacted with the OBWI for this period of time, then that user will be
automatically logged out. Entering zero for the time-out disables the function. The OBWI banner is
the text that is displayed prior to login. The Help URL can be changed to a new location. By default,
the link is already configured.

OSD

The OSD tab is where you can edit the OSD banner and OSD hotkey for all receivers. The OSD
banner, if enabled, allows you to change the text that is displayed on every receiver prior to login.
The OSD hotkey is the system default hotkey for activating the OSD display. From the OSD tab,
you can change the default hotkey and create a custom key sequence.
To edit OSD settings:
1. Select System Settings - OSD.
2. From the drop-down list, select the Receiver OSD hotkey. If custom is selected, enter the
custom key sequence.
3. Select the drop-down to enable or disable the Receiver OSD banner.
4. Enter the Receiver OSD banner text.