16 .....Avocent® Matrix High Performance KVM Switching System
Sessions Tab in OBWI
When a specific session is selected, the details are displayed in the bottom Session Details pane.
The session details are read only.
To connect a KVM session:
1. On the sidebar under Connect Session, click Connect .
2. From the drop-down list, select either Private or Shared session (other authorized users will
be able to join a shared session).
3. Select the username, receiver and transmitter. When you select a username, the list of
receivers is populated according to the rights of that user and the allowed shared/private
mode(s) of each receiver. When you select a receiver, the list of transmitters is populated
according to the rights of the user and the allowed shared/private mode(s) of each transmitter.
4. Click Connect .
To disconnect a session:
1. Select a session from the list of active sessions.
2. On the sidebar under Disconnect Session, click Disconnect .
Users Tab
The Users tab is used for creating, deleting and logging users in or out of receivers. An
administrator must create a user account for each user. There is a limit of 8 0 user accounts on a
master switch. The administrator account on a slave switch can be used to change a limited amount
of settings on the slave switch.
NOTE: Slave switches do not have user accounts except for the administrative account.