Life Fitness FSFCM1-0102-001 User Manual page 11

NOTE: SHROUDS HAVE BEEN REMOVED FOR ILLUSTRATIONAL PURPOSES ONLY
MUST DISASSEMBLE ONE END OF CABLE AND REASSEMBLE AFTER ROUTING (SEE FIG 7 PAGE 14)
STEP 4
NOTE: IF THE 50# ADD ON KIT WAS PURCHASED, USE THE CABLE FROM THAT KIT AND REFER TO
KIT ASSEMBLY INSTRUCTION FOR HEAD PLATE ASSEMBLY
Dimension between bottom of PULLEY BRACKET and top of JAM NUT approximately 1 inch.
Taking one end of UPPER (SHORT) CABLE 7745402 (43) insert thru top front pulley and follow routing illustration to
HEAD PLATE PULLEY (10) and continue to other side ending at the other top front pulley.
CABLE MUST BE INSERTED BETWEEN PULLEY AND CABLE RETAINING CLIPS AND MOVE FREELY
LEA7745402
FIGURE 4
LEA
11
EYE HOOK ORIENTATION