Life Fitness FIT 1.0 CM User Manual page 8

DO NOT TIGHTEN LOWER FRAME COMPONENTS
UNTIL TOP COVERS ARE INSTALLED
6-20 x 1/2
10-32 x 3/8
3/8 x 3/4
STEP 2:
LOOSELY attach BASE PLATFORM (2) to front of FRONT UPRIGHT (1) using two 3/8 x 3/4" BOLTS (31),
and two 3/8 WASHERS (28).
LOOSELY attach the BASE PLATFORM (2) to the sides of UPRIGHTS (4) and (5) using two 3/8 x 3-1/2
BOLTS (34) and two 3/8 WASHERS (28)
Assemble TOP BACK COVER (16) to UPRIGHT FRAMES using two METAL SCREWS (25)
LOOSELY attach TOP FRONT (17) COVERS to UPRIGHT FRAME using two METAL SCREW (25)
Then attach TOP FRONT COVER (17) to BACK TOP COVER (16) using six PLASTIC SCREWS (26)
ADJUST FRAME UNTIL IT IS ALIGNED AND THEN SECURELY TIGHTEN ALL FRAME
CONNECTIONS AND PLASTIC SCREWS.
SECURELY TIGHTEN TOP PULLEY
ASSEMBLY (7) AFTER INSTALLING COVER (16)
!! DO NOT OVERTIGHTEN
SCREWS (25) AND (26)
FIGURE 2
8
3/8 x 3-1/2