JRC JSS-2150 Instruction Manual page 56

Operation
(4) Using channel lists
Besides the procedure above, user channels and ITU channels can also be set from the channel
lists (5.1 User channel list or 5.2 ITU channel list). This section explains how to set channels that
are already registered from the user channel list.
■ ■
Procedure
1 .
1 .
1 .
Press the MENU
hierarchical menus, select 5. Radio
operation.
2 .
2 .
2 .
Select 1. User channel list and press ENT.
The user channel list index (group list) as
shown at right is displayed.
3 .
3 .
3 .
Select the intended channel group and press
ENT.
The user channel list as shown at right is
displayed.
4 .
4 .
4 .
Select the channel to set and press ENT.
The user channel settings are complete, the
status display is displayed.
4-14
key, and through
5) Radio operation
1.User channel list
2.ITU channel list
3.Mode :TEL
4.Receiver
5.Transmitter
0.Back
5.1)User channel list (index)
No CH group name Type
01 JRC Tokyo TEL
02 Pacific ABC CW
03
04
05
06
07
08
5.1)User channel list (table)
Name: JRC Tokyo
Type: TEL
CHNo Rx[kHz] Tx[kHz]
001 4357.0 4065.0
002 4360.0 4068.0
003 4363.0 4071.0
004 4366.0 4074.0
005 4369.0 4077.0
006 4372.0 4080.0
Mode
TEL
TEL
TEL
TEL
TEL
TEL