5.3.5
Transferring user channel data to another controller
When 2 controllers are connected, stored information (user channel table) can be transferred
from the controller having access rights to another controller (monitor condition).
■
■
Procedure
1
.
1
.
1
.
Press the
MENU
hierarchical menus, select 7.3 My
controller.
2
.
2
.
2
.
Move the cursor to 5. Data transfer with
the numeric keypad or jog dial.
The popup screen as shown at right is
displayed.
3
.
3
.
3
.
Press ENT to confirm the selection.
The popup screen as shown at right is
displayed to indicate the controller's
status for forwarding.
The screen at right (below) is displayed
on the monitor.
If OK is selected or the screen is left as
it is for 10 seconds, transferring of
stored information is started.
4
.
4
.
4
.
Forwarding of stored information is
started.
During forwarding, the popup screen as
shown at right is displayed.
The screen at right (below) is displayed
on the monitor.
The previous screen is returned to when
forwarding is completed.
To cancel forwarding midway,
Note
press the
key, and through
CANCEL
key or ENT.
Settings & Registrations
7.3)My controller
1.LCD adjustment
2.Sound
3.User key assign
4.Tx meter
:PWR
5.Data transfer
0.Back
7.3)My controller
1.LCD adjustment
OK to transfer the
2.Sound
user channels to
3.User key assign
another controller?
4.Tx meter
: Ia
[ OK ]
[Cancel]
5.Data transfer
0.Back
7.3)My controller
1.LCD adjustment
2.Sound
Wait a moment, please.
3.User key assign
4.Tx meter
: Ia
5.Data transfer
0.Back
OK to update this
user channel table?
[ OK ]
[Cancel]
[Display on monitor]
7.3)My controller
1.LCD adjustment
2.Sound
Data sending...
Data sending...
3.User key assign
4.Tx meter
: Ia
[Cancel]
[Cancel]
5.Data transfer
0.Back
Updating the table...
[Cancel]
[Display on monitor]
5-7