Reducing The Tx Power; Setting The Antenna Tuning Power - JRC JSS-2150 Instruction Manual

4.3.10

Reducing the Tx power

■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
hierarchical menus, select 5.5
Transmitter.
2 .
2 .
2 .
1. Select Power and press ENT to move
the cursor to the right, then use the jog dial
to select Low.
After selecting and pressing ENT, the
settings are complete.
Note - The same settings can be done by pressing and holding the
the
- When the Tx power is reduced,
is displayed.
4.3.11

Setting the antenna tuning power

■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
hierarchical menus, after 5.5 Transmitter
appears, move the cursor to 2. Tune
power.
2 .
2 .
2 .
Press ENT to move the cursor to the right,
then use the jog dial to select a value from
0 to 3.
The larger the number the stronger the
antenna tuning power.
The factory default setting is 0 (Normal).
After selecting and pressing ENT, the
settings are complete.
key, and through
PW R
9
key at the same time.
R D C
key, and through
5.5)Transmitter
1.Power
2.Tune power
0.Back
5.5)Transmitter
1.Power
2.Tune power
0.Back
LOW (status display) or
5.5)Transmitter
1.Power
2.Tune power
0.Back
5.5)Transmitter
1.Power
2.Tune power
0.Back
Operation
:High
:Normal
:Low
:Normal
FUNC key and
L (menu screen)
:High
:Normal
:High
:+2
4-19