Chain Dial; Editing Entries - Panasonic KX-TG7412C Operating Instructions Manual

TG74xxC(e).book Page 19 Monday, February 16, 2009 1:44 PM
Searching by first character
(alphabetically)
1
{C}
2
Press the dial key ({0} – {9}, {*},
or {#}) which contains the
character you are searching for
(page 18).
L Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3
{V}/{^}: Scroll through the
phonebook if necessary.
4
{C}

Editing entries

1
Find the desired entry (page 18).
i {EDIT}
2
{V}/{^}: Select the information you
want to edit.
■ To change the name or phone
number:
{V}/{^}: Select the name or
phone number. i {SELECT}
i Edit the information (page
18). i {OK}
■ To change the ringer ID:
{V}/{^}: Select the current ringer
ID. i {SELECT} i Select the
desired setting. i {OK}
L To turn the ringer ID off, select
"No Ringer ID".
3
{SAVE} i {OFF}
Shared Phonebook
Erasing entries
1
Find the desired entry (page 18).
2
{ERASE}
3
{V}/{^}: "Yes" i {SELECT} i
{OFF}

Chain dial

This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
1
During an outside call, press {C}.
2
{V}/{^}: Select the desired entry.
3
Press {CALL} to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 15).
L If you have rotary/pulse service, you
need to press {*} (TONE) before
pressing {C} in step 1 to change the
dialing mode temporarily to tone.
19