Initial Settings; Dialing Mode; Date/Time - Panasonic KX-TG7412C Operating Instructions Manual

TG74xxC(e).book Page 14 Monday, February 16, 2009 1:44 PM
Getting Started
beforehand by selecting "Single
item" or "Multi items" as the
display mode setting (page 27).
L When "Multi items" is selected as
the display mode, you can switch the
screen to confirm the detailed
information by pressing {SINGLE}.

Initial settings

Symbol meaning:
Example: {V}/{^}: "Off"
Push the joystick down or up to
select the words in quotations.
Display language
You can select either "English" or
"Français" as the display language.
The default setting is "English".
1
{MENU} (centre of joystick) i
{#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press down the centre of the joystick
to save. i {OFF}
Voice guidance language
Available for:
KX-TG7431 series (page 3)
You can select either "English" or
"Français" as the voice guidance
language of the answering system. This
setting also determines the voice
announcement language of the talking
alarm clock and talking battery alert. The
default setting is "English".
1
{MENU} (centre of joystick) i
{#}{1}{1}{2}
2
{V}/{^}: Select the desired setting.
3
{SAVE} i {OFF}
14

Dialing mode

If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
{MENU} (centre of joystick) i
{#}{1}{2}{0}
2
{V}/{^}: Select the desired setting.
3
{SAVE} i {OFF}
Date and time
1
{MENU} (centre of joystick) i
{#}{1}{0}{1}
2
Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2009
{0}{7} {1}{5} {0}{9}
3
{OK}
4
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
5
{AM/PM}: Select "AM" or "PM".
6
{SAVE} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When French is
selected, 24-hour clock format is
used.
L To correct a digit, push the joystick left
or right to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.