Chain Dial; Editing Entries - Panasonic KX-TGE432 Operating Instructions Manual

Phonebook
Changing group names/setting ringer
ID
The default group name is "Group 1" to
"Group 9".
1
MFN W a MMENUN
2
MbN: "Group" a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
To change group names
MbN: "Group name" a MSELECTN a
Edit the name (10 characters max.). a
MSAVEN
To set group ringer tone
MbN: Select the current setting of the
group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN
5
MOFFN
Finding and calling from a
phonebook entry
1
MFN W
2
To scroll through all entries
MbN: Select the desired entry.
To search by first character
Press the dial key (0 to 9, or #)
which contains the character you are
searching for.
MbN: Scroll through the phonebook if
necessary.
To search by group
MGROUPN
MbN: Select the desired group. a
MSELECTN
MbN: Scroll through the phonebook if
necessary.
3
M N

Editing entries

1
Find the desired entry (page 26).
2
MMENUN a MbN: "Edit" a MSELECTN
3
Edit the name if necessary. a MOKN
4
Edit the phone number if necessary. a
MOKN
For assistance, please visit http://shop.panasonic.com/support
26
TGE43xUS(en)_1112_ver021.pdf 26
5
MbN: Select the desired group (page 25).
a MSELECTN 2 times a MOFFN
Erasing entries
Erasing an entry
1
Find the desired entry (page 26).
2
MMENUN a MbN: "Erase" a MSELECTN
3
MbN: "Yes" a MSELECTN a MOFFN
Erasing all entries
1
MFN W a MMENUN
2
MbN: "Erase all" a MSELECTN
3
MbN: "Yes" a MSELECTN
4
MbN: "Yes" a MSELECTN a MOFFN

Chain dial

This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1
During an outside call, press MFN W.
2
MbN: Select the desired entry.
3
Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 16).
R If you have rotary/pulse service, you need
to press * (TONE) before pressing MFN
W in step 1 to change the dialing mode
temporarily to tone. When adding entries to
the phonebook, we recommend adding *
(TONE) to the beginning of phone numbers
you wish to chain dial (page 25).
2015/11/12 10:12:56