Panasonic KX-TG7412C Operating Instructions Manual page 47

TG74xxC(e).book Page 47 Monday, February 16, 2009 1:44 PM
Problem
Caller information is not
*1
announced.
I cannot dial the phone
number edited in the caller
list.
Time on the unit has
shifted.
The 2nd caller's
information is not
displayed during an
outside call. (Visual Call
Waiting feature does not
function.)
*1 KX-TG7431 series: page 3
Answering system (KX-TG7431 series: page 3)
Problem
The unit does not record
new messages.
Cause/solution
L The handset or base unit's ringer volume is turned
off. Adjust it (page 16, 23).
L The Talking Call Display feature is turned off. Turn
it on (page 24).
L The number of rings for the answering system is
set to "2" or "Toll saver". Select a different
setting (page 37).
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
"1" or the area code is missing). Edit the phone
number with another pattern (page 32).
L Incorrect time information from incoming Call
Display changes the time. Set the time adjustment
to "Manual" (off) (page 23).
L In order to use Call Display, Call Waiting, or Visual
Call Waiting, you must first contact your service
provider/telephone company and subscribe to the
desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Call Display and Visual Call
Waiting services.
Cause/solution
L The answering system is turned off. Turn it on
(page 33).
L The message memory is full. Erase unnecessary
messages (page 35).
L The recording time is set to "Greeting only".
Change the setting (page 38).
L If you subscribe to a Voice Mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit's
number of rings setting or contact your service
provider/telephone company (page 37).
Useful Information
47