Advertisement
82
FIGURE 33
STEP 33:
• SECURE the ball end of the PRESS CABLE (44) and two 4-1/2" PULLEYS (48) to the SWIVEL PULLEY BRACKET (35) using two 3/8
X 2" BOLTS (89), four 3/8" WASHERS (80), and two 3/8" LOCK NUTS (82) as shown in FIGURE 33. (NOTE: Loop the cable around
the pulleys prior to inserting it into the SWIVEL PULLEY BRACKET.)
• Route the threaded end of the PRESS CABLE (44) through the large hole in the PRESS FRAME (37) as shown in FIGURE 33.
44
37
48
80
35
44 PRESS CABLE
89 3/8 X 2"
27
Advertisement
