OWC Mercury Elite Pro Assembly Manual & User Manual page 8
Firewire 800 / usb 3.0 / esata
Hide thumbs
Also See for Mercury Elite Pro:
- User manual ,
- Assembly manual (24 pages) ,
- Assembly manual & user manual (16 pages)
Table of Contents
Advertisement
6. Slide the inner chassis back into the outer case, as shown below.
7. Once the front grill of the inner chassis sits flush with the edge of the outer case, turn the
Mercury Elite Pro on its side. Use the two smaller screws you removed in Step 1, and re-
fasten the outer case to the inner chassis.
This completes the assembly process.
OWC MERCURY ELITE PRO
6
DEVICE SETUP
Advertisement
Table of Contents
Need help?
Do you have a question about the Mercury Elite Pro and is the answer not in the manual?
Questions and answers