Table of Contents
Advertisement
2
INSTALLATION
2.1
Handling Precautions
The casing of the Display gives good protection to its internal components. To prevent damage to the
LCD Display, it is important to observe a few simple precautions.
2.1.1 Unpack your display carefully to prevent damage.
2.1.2 Save the carton and packing in case you need to return the Display for service.
2.1.3 If the surface is soiled, wipe lightly with clean absorbent cotton or other soft cloth.
2.1.4 The TFT panel and circuit boards contain devices that are sensitive to Electrostatic
Discharge. Adequate ESD precautions should be taken during unpacking, handling and
installation of the TFT monitor.
2.1.5 There are no user serviceable parts inside the monitor. All servicing must be carried
out by qualified personnel.
2.1.6 The casing should never be opened by unqualified personnel, as there are potentially
harmful voltages within this equipment.
2.2
Planning
Before you install your Display, plan the installation considering:
2.2.1 Display location and mounting options.
2.2.2 Power requirements.
2.2.3 Cable runs do not run video cables near any AC power sources.
2.2.4 Additional components e.g. Glass Bridge Commander and peripheral devices.
2.3
Power Requirements
The display requires an external, regulated, 12.1V DC power supply.
To meet onboard requirements, Nauticomp offers a wide range of external power supplies to match
the power consumption requirements of individual displays being – 12V DC, 24V DC, & 115/230V AC.
Page 6 of 30
Advertisement
Table of Contents
