Nauticomp 21-1210 User Manual page 12

2 INSTALLATION continued
2.11.2 Cabling – Connections
2.11.2.1
2.11.2.2
2.11.2.3
2.11.2.4
2.11.2.5
CAUTION:
Always connect all video input cables before connecting the power.
Step 1 Align LTW logo on each circular connector so that it faces away from the
Step 2 Gently pull all cables to ensure that they are connected securely.
Power output from the provided Nauticomp Power Supply is to be 12.1V
DC. Please check voltage before connecting to the Display for the first
time.
To aid installation ALL circular connectors on the display are colour
coded and labelled to match corresponding interface cables.
All cables can only be installed one-way. Do not force any cables in.
All Nauticomp cables have locking mechanisms to ensure proper
installation.
All connectors must be connected to the output source before
connecting to Display.
Above Illustration – Interface Connections (Rear Bottom Entry)
Display – Press in and turn connector clockwise until secure. Repeat step for all
circular connectors.
Page 12 of 30