Table of Contents
Advertisement
1
GENERAL continued
1.3
Contents of the Package
Each Display is shipped with:-
Description
Display - Power Cable
Display - Mounting Kit
G Commander
Power Supply 12.1V DC
Standard Power Cable
VGA Video Cable
Composite Video Cable
Composite Video Cable
DVI Video Cable
Blanking Plug Set
User Manual
Cut-Out (Paper) Kit
Part Number
23-LTWPOW
23-GBHARDWARE
23-LTWGBCOMM
As Specified
As Specified
23-LTWVGA
23-LTWCOMPOSITE
23-LTWCOMPOSITE
(white)
23-LTWDVI
23-LTWCAPS
GBManual Rev X
As Specified
Page 4 of 30
Qty Remarks
1
Feed from Nauticomp Power Supply:
Display input 2pin (RED) connector – Length approx.
10' (3m).
1 Kit
X11 Fixing Bolts, Bolt Clips & Centering Plates.
These are to be used when securing the display into a
console.
1
External 4 Button Controller complete with cable –
Control for Glass Bridge Display
Length 25' (7.6m).
Note: X4 Nut/Washers for mounting included.
1
Either: 12V DC, 24V DC or 115/230V AC
1
Only supplied with AC Power supplies. Either:
US/UK/Euro Cord.
Length approx. 6'8" (2m).
Note: Cable not supplied with DC versions...
2
Connects standard VGA, Length approx. 10' (3m).
1
3 into 1 Cable: Signal connector designation-X3
(YELLOW) Phono connectors. Composite 1 (BLUE) Wire,
Composite 2 (GREEN) Wire, Composite 3 (RED) Wire.
Display Input (YELLOW) connector.
Length approx. 10' (3m).
1
S-Video 1 (WHITE) connector to Composite
Length approx. 10' (3m).
2
Connects standard DVI, Length approx. 10' (3m).
1 set
X9 for covering unused connections.
1
Installation & User Manual (Refer Section 8.5 for Rev)
2
X1 Display & X1 GB Commander
®
(GREEN) connector.
Advertisement
Table of Contents
