Table of Contents
Advertisement
4
MAINTENANCE
4.1
Routine Maintenance
Good performance requires maintenance checks regularly. The following are recommended:
4.1.1 Check all cable connectors on the rear of the display to ensure they are secured.
4.1.2 Check the cable connectors on the external Nauticomp Power Supply. Inspect for
corrosion on all connections – Terminal contacts must be tightly fastened.
4.1.3 Examine all cables for signs of damage such as; chafing, cuts, nicks or corrosion.
4.1.4 Take care when cleaning the display. Wipe the LCD with clean, damp cloth to remove
dust or salt deposits. Use an LCD cleaner to dissolve the debris and change the cloth
frequently so as not to scratch or damage the glass. To remove grease marks, carefully
apply a mild detergent solution or IPA (Isopropyl Alcohol).
CAUTION:
Ensure the Display is disconnected from power before carrying out routine maintenance.
CAUTION:
Do not wipe the Display with a dry cloth - As this could scratch the screen coating.
CAUTION:
Do not use Acid, Ammonia based or abrasive products.
Page 21 of 30
Advertisement
Table of Contents
