Table of Contents
Advertisement
3
OPERATION continued
3.6
Utilities Menu
Utilities - Functionality...
OPTION
Setup
Auto Picture Setup: Auto adjust the image position, phase and size
Auto Color Gain: Auto Color Calibration (See appendix IV)
Wide Screen Mode detection: Recognize the wide screen mode coming from ARGB port.
Manual Clock :
Manual Phase :
Auto Source Seek: Auto:
-
VGA 1
Composite 1
Composite 4
The corresponding input port name display on OSD menu will disappear once setting "OFF".
De-interlacing Mode:
Auto Power:
Enable RGB SOG:
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
Gamma: 0.6 / 0.7/ 0.8 / 1.0 / 1.6 / 1.8 / 1.9 / 2.0 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / User Setting
Freeze
OFF / ON
DESCRIPTION / ILLUSTRATION
- Off
- 1280x768
- 1360x768
- 1366x768
Adjust the image horizontal size
Fine tune the data sampling position (adjust image quality)
ON – Auto source select always enable
OFF – Disable auto source select function
Setup: Selection for the corresponding input sources detection
VGA 2
Composite 2
AFM
: Auto Film Mode
TNR
: Temporal Noise Reduction
MADI
: Motion Adaptive De-interlacing
DCDi
: Low Angled De-interlacing
[See Appendix VI for AFM, TNR, MADI, DCDi function description]
OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
: Freeze the image
: OFF / ON
DVI 1
Composite 3
OFF / ON
Page 18 of 30
DVI 2
Advertisement
Table of Contents
