Table of Contents
Advertisement
3
OPERATION
The Display is designed to minimize overall physical dimensions to enable multiple Displays to be
mounted in close proximity maximizing available space. No user controls or indicators are on the
actual Display.
Nauticomp developed the GB Commander which is an external four button display controller,
used to control the Glass Bridge Display
3.1
Primary Control Functions
The Glass Bridge Display
GB Commander Buttons will illuminate. Give the unit a few seconds to calibrate, when complete there
will be one red and three blue buttons. Each button performs a primary control function.
GB Commander Layout
CAUTION:
Ensure the GB Commander is connected to the Display before power is applied to the Display.
is designed to power up when it receives power. On initial 'Power Up' the
®
Button - Primary Control Function (non Menu Mode)
1)
2)
3)
4)
functionality.
®
Power ON / OFF , and Select
Increase Backlight Brightness, Right, Adjust up, and Select
Decrease Backlight Brightness, Left, Adjust Down
Dim to Red, Up
Page 14 of 30
Advertisement
Table of Contents
