Wan Speed - iBall iB-WRX300NP Baton User Manual

●
Enable Traffic Statistics: Check the box to gather bandwidth usage by
PCs on your LAN. It is disabled by default. Disabling this option may boost
router's packet processing capacity. When enabled, system will
dynamically renew statistics information every 5 seconds.
●
IP Address: Displays IP address information of a corresponding
statistics item.
●
Uplink Rate: Displays how many Kbytes of data have been transmitted
per second.
●
Downlink Rate: Displays how many Kbytes of data have been received
per second.
●
Sent Message (TX Packets): Displays the total number of packets
transmitted by a corresponding IP address through the router.
Sent Bytes: Displays how many Mbytes of data have been transmitted by
a corresponding IP address through the router.
Received Message (RX Packets): Displays the total number of packets
received by a corresponding IP address from the router.
●
Received Bytes: Displays how many Mbytes of data have been
received by a corresponding IP address from the router.

4.9 WAN Speed

This section allows you to configure WAN speed. Default settings are
recommended.
29