Wan Speed - iBall iB-WRH150N User Manual

150M Wireless-N Home Router
(iB-WRH150N)
dynamically renew statistics information every 5 seconds.
● IP Address: Displays IP address information of a corresponding
statistics item.
● Uplink Rate: Displays how many Kbytes of data have been transmitted
per second.
● Downlink Rate: Displays how many Kbytes of data have been received
per second.
● Sent Message (TX Packets): Displays the total number of packets
transmitted by a corresponding IP address through the router.
Sent Bytes: Displays how many Mbytes of data have been transmitted by
a corresponding IP address through the router.
Received Message (RX Packets): Displays the total number of packets
received by a corresponding IP address from the router.
● Received Bytes: Displays how many Mbytes of data have been
received by a corresponding IP address from the router.

4.9 WAN Speed

This section allows you to configure WAN speed. Default settings are
recommended.
● AUTO: DO NOT change this default setting unless you are connecting
an excessively long Ethernet cable from your ISP, which may degrade
drive capability, to the router's WAN port.
● 10M HALF-duplex: Select it if your router's WAN port does not function
properly when connected to an Ethernet cable from your ISP; excessive
30