8.1 IP Address Filtering
To better manage the computers in LAN, you can regulate LAN
computers' access to certain ports on Internet using Client Filter
functionality.
●
Filter Mode: Select Forbid only or Permit only according to your own
needs.
●
Access Policy: Select a number (indicating a filter rule) from the
drop-down menu.
●
Remark: Enter a meaningful name to yourself for a new filter rule.
●
Start /End IP Address: Enter a starting/ending IP address.
●
Port: Enter TCP/UDP protocol port number (s); it can be a range of ports
or a single port.
●
Type: Select a protocol or protocols for the traffic (TCP/UDP/Both).
●
Time: Select a time range for the rule to take effect.
●
Day: Select a day or several days for the rule to take effect.
●
Enable: Check to enable or uncheck to disable a corresponding filter rule
(allow/disallow matched packets to pass through router).
Chapter 8 Security Settings
47