Graphic Display - Security-Center SECVEST 868 Operating Instructions Manual

5. Graphic display

The graphic display informs you about all events concerning the radio alarm system. The following is a summary of the different display messages and
their meaning:
This symbol appears if a voice message
exists that you should listen to. An
acoustic message is issued every time
you deactivate the radio alarm panel.
This is: „There ia a message waiting"
This symbol appears when the
activity monitoring is active. Make sure
you also define the period
of monitoring. Activity monitoring
also works when the radio alarm system
is deactivated.
Menu Menu Menu Menu
Press the button under the menu display.
The alarm panel asks you to enter your
access code (user code). If the code is
accepted, you see the user menu. Here
you can perform all user functions
released for the installer. Note that some
functions in the user menu require a user
code with administrator rights (master
code).
21:00 21:00 21:00 21:00
01/08/2007 01/08/2007 01/08/2007 01/08/2007
Displays the current time and date.
6
The four black bars stand for the
four individual partitions of the
Secvest 868. A letter in the black
bar represents the state of the
partition (1–4). The letters and
their meaning:
U: U: U: U:
Deactivated
S: S: S: S:
Activated
P: P: P: P:
Internally activated
Note: A letter is displayed in a bar
only if at least one detector is
present in this partition.
This symbol indicates an error that
must be cleared immediately. For
a summary of the different error
displays and their meaning, see
the table at the end of these
instructions. To display the error,
press the button under the
display.
You are prompted to enter a
valid user code.