Security-Center SECVEST 868 Operating Instructions Manual page 23

18.5.1.2. Change user type
Press the control button to select "Type" and confirm by pressing
the control button under the word "Select". After confirming this
menu item, you receive the following graphic display:
You can choose between two user types:
Normal user
•
Administrator
•
In contrast to the normal user, the Administrator
different settings in the user menu. The normal user
his/her user code, but cannot create users or make system setting
changes.
dministrator can make many dministrator dministrator
normal user can only change normal user normal user
18.5.1.3. Define partitions
In this menu, you define user authorisations. In this way, different users
can control different partitions. The settings refer to the proximity tag
trained for this user. After confirming this menu item, you receive the
following graphic display:
The system shows you all four partitions. Press the control button
select the partition whose settings you want to change. The setting
means:
Yes = This user can (de)activate this partition.
•
No = This user cannot (de)activate this partition.
•
Change the setting with the control button
"Change" and the setting changes.
When you have made your setting, end your input by pressing the
control button under the setting "
23
to
under the word
Done
".