Table of Contents
Advertisement
Teaching the proximity
tag
Select "Tag". The system
prompts you to hold the
proximity tag over the
panel.
Hold the proximity tag
over the alarm panel as
shown in the picture.
When the system detects
the proximity tag, it
confirms that learning
was successful.
Important: One proximity
Important:
Important:
Important:
tag can be trained for
each user. The user code
is still active.
Teaching the
telecommand without PA
function (FU5155)
Select "Telecommand".
The system prompts you
to press a button on the
remote control until the
system has detected
and learnt to recognise
the remote control. You
can press any key for this
step.
When the system detects
the remote control, it
confirms that learning
was successful. You can
teach up to 16
telecommands. You can
assign more than one
telecommand to a user.
Teaching the
telecommand with PA
function (FU5150)
Teaching the alarm
panel the telecommand
with PA function is similar
to the process of learning
a telecommand without
PA function (see left
column) The difference
by using theis kind of
telecommands is that by
learning the
telecommand function
you also learn the PA
function You cannot
learn/erase the PA
function individually.
When the system detects
the remote control, it
confirms that learning
was successful. You can
teach up to 16 remote
controls. You can assign
more than one remote
control to a user.
25
Teaching the radio
cylinder
Select "Telecommand".
The system prompts you
to teach the radio
cylinder. Press the button
on the radio cylinder and
lock the door. The
cylinder sends a learn
message to the radio
alarm system.
When the system detects
the radio cylinder, it
confirms that learning
was successful. A radio
cylinder is treated like a
telecommand device,
i.e., up to 16
telecommands and/or
radio cylinders can be
trained. Depending on
the user for which the
radio cylinder was
trained, the user can
activate or deactivate
the corresponding areas.
For example: If user 2 is
authorised to control
partitions 2 and 3, these
two partitions are
activated via the radio
cylinder.
Teaching the Pendant
The radio alarm system
can handle two types of
emergency detectors.
This emergency alarm is
used for a social call and
has the same function as
the social call button on
the keypad. Select
"Pendant". The system
prompts you to teach
the emergency
transmitter.
When the system detects
the emergency
transmitter, it confirms
that learning was
successful. You can
teach up to 16
emergency transmitters.
This number includes the
other emergency
transmitters (PA).
Advertisement
Table of Contents
