Sony Bravia KDL-52Z5500 Operating Instructions Manual page 52

Condition
The picture from equipment
connected to the
sockets/jacks is not displayed
in colour, or is displayed in
irregular colours.
No picture from the connected
equipment appears on the
screen.
You cannot select the
connected equipment on the
Home Menu or you cannot
switch the input.
Sound
The picture is good, but there
is no sound.
Channels
You cannot select your desired
channel.
Some channels are blank.
You cannot view digital
channels.
Network
Connection diagnostic results
indicate a failure.
52
GB
Explanation/Solution
• Check the connection of the
1 or 2 sockets/jacks are firmly seated in their respective sockets/jacks.
• Turn the connected equipment on.
• Check the cable connection.
• Press to display the list of inputs, then select the desired input.
• Correctly insert the memory card or other storage device in the digital
still camera.
• Use a digital still camera memory card or other storage device that has
been formatted according to the instruction manual supplied with the
digital still camera.
• Operations are not guaranteed for all USB devices. Also, operations
differ depending on the features of the USB device and the video being
played.
• Check the cable connection.
• Set the server to be displayed on the Home Menu (page 31).
• Press 2 +/– or % (Mute).
• Check if the "Speaker" is set to "TV Speaker" (page 39).
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
• Switch between digital and analogue mode, and select the desired
digital/analogue channel.
• The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
• Contact a local installer to find out if digital transmissions are provided
in your area.
• Upgrade to a higher gain aerial/antenna.
Check Connections
• Use a straight cable for the LAN cable.
• Check if the cable is connected firmly.
• Check the connection between the TV and the router.
Check Settings
• Change the IP address for the DNS server (see "Checking the Network
Connection" on page 30) while referring to the following:
–Contact your Internet service provider.
–Specify the IP address of the router if you do not know the DNS of
your Internet service provider.
• Confirm the proxy server settings (page 30).
1 or 2 sockets/jacks and check if the