Sony Bravia KDL-52Z5500 Operating Instructions Manual page 42

Intelligent Picture
Manual Programme
Preset
42
GB
On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On
Automatically reduces the picture noise.
Off Turns off the "Intelligent Picture" feature.
To preset a channel, press PROG +/– to select the programme number, before
selecting "Label," "AFT," "Audio Filter," "Skip," "LNA" or "Colour System." You
cannot select a programme number that is set to "Skip" (page 42).
Programme/
Presets programme channels manually.
TV System/ 1
Frequency
2
3
4
5
6
Label Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in "Programme
Labels" (page 41).
AFT
Allows you to fine-tune the selected channel manually if you
feel that a slight tuning adjustment may improve picture
quality.
When "On" is selected, fine tuning adjustments are made
automatically.
Audio Filter Improves the sound of individual channels when distortion
occurs in mono broadcasts.
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
Skip Skips unused analogue channels when you press PROG +/–
to select channels. To select channels you have programmed
to skip, use the corresponding number buttons.
LNA Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
Colour System
Selects the colour system ("Auto," "PAL," "SECAM")
according to the channel.
Signal Level Displays the signal level for programme currently being
watched.
Press F/f to select "Programme," then press
Press F/f to select the programme number you want to
manually tune (if tuning a VCR, select programme 0),
then press .
Press F/f to select "TV System," then press
Press F/f to select the best received TV broadcast
systems, then press .
Press F/f to select "Frequency," then press
Press G/g to search for the next available channel. The
frequency band ("VHF Low," "VHF High" or "UHF") is
changed accordingly.
.
.
.