Related Manuals for Lilin nvr400L
Summary of Contents for Lilin nvr400L
- Page 1 16CH H.264 NVR INSTRUCTION MANUAL...
- Page 2 Introduction The 16-channel NVR L series Network Video Recorder offers a standalone solution for managing IP cameras and systems. It uses high quality H.264 decoders to deliver 3MP/1080P/720P/D1/VGA/CIF IP camera streams. Each channel can be individually configured to SD and or HD resolution to optimize storage space. Embedded HDMI(VGA) engines offer 3D intellectual motion adoptive refinement, providing a maximum resolution of 1080P.
-
Page 3: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Internet Explorer are registered trademarks of Microsoft Corporation in the U.S and/or other countries. • Adobe and Adobe PDF are registered trademarks of Adobe Systems Incorporated in the U.S and/or other countries. • JavaScript and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. -
Page 4: Front Panel
Front-Panel POWER LED (Yellow) Alarm LED (Red blinking) NVR power on/off indicator Indicates motion or alarm triggers LAN LED (Green) USB 2.0 port LAN link light HDD LED (Green blinking) HDD activating indicator... -
Page 5: Remote Control
Remote control The remote control is a small wireless handheld device with an array of buttons for adjusting settings. The buttons are separated in regions based on their features including NVR operational keys, Pan, Tilt, and Zoom (PTZ) and numerical keys. NVR remote control operational keys MENU Setup menu... -
Page 6: Touch Screen
Touch screen Pinch Zoom Out Swipe Pinch and zoom: Pinch the area on the touch screen where you want to zoom. To zoom in move your fingers outwards, and to zoom out move your fingers inwards Scroll screen: Swipe the screen left and right to navigate through the menus Single tap: Tap icons to select Double tap: Double tap in camera view to return to previous menu Rear Panel... -
Page 7: Hdd Info
HDD Info HDD INFO shows the following information: • Model — HDD model • Size —the capacity of the hard disk drive • Status — indicates whether the HDD is formatted or unformatted • Select — “□“ indicates that the HDD is selected •... -
Page 8: Firmware Update
Password/Access The NVR can be configured for up to 15 users with different access rights Scroll to select between: Admin (default password 1111) Operator (default password 2222) Guest (default password 3333) Users 1 to 12 Once a user is selected you can edit passwords, enable password protection and set up the following user rights: •... - Page 9 To perform firmware update using USB flash disk, follow the instructions: Plug in a portable USB disk at the NVR’s USB port Press Enter to start firmware update After the transfer has finished, remove the USB device and reboot the NVR. Ensure that the firmware is located in the firmware directory of the USB disk Logon Type in the NVR’s IP address in the HTTP address box via Internet browser...
- Page 10 Firmware update This NVR is set to perform firmware upgrade via network. After the NVR receives the firmware, it starts to perform firmware upgrade automatically. After finishing the firmware update, the HTML page will reload. The user can then continue to operate the NVR. To perform network firmware update, click on Browse button and locate the firmware.
- Page 11 Appendix C Supported USB-DVD/RW Manufacturer Model SONY DRX-S30U-W LITE-ON eSAU108 LITE-ON eTAU108 LITE-ON eHAU424-01 Supported DVD Disk Brand Specification Capacity Max Speed Note Melody DVD-RW 4.7GB Rewritable RiTEK DVD-RW 4.7GB Rewritable Sony DVD+R 4.7GB Burn once OEM disk DVD-R 4.7GB Burn once Appendix D Supported USB Flash Disk...
- Page 12 Appendix F Supported USB Touch Screen • • GeChic On-Lap1002 DELL 2340T • • Hanns HT271HPB DELL ST2220T • • Hanns HT231HPB Iiyama ProLite T2452MTS • • ViewSonic TD2220-2(Wistron) Planar PXL2430MW • • ViewSonic TD2220 Acer T232HL • • DELL E2014Tt HP L2206tm •...
- Page 13 Question: Should I use RTP/UDP protocol for connecting IP cameras to the NVR? Answer: In LAN environments please use RTP/TCP or RTP/HTTP protocol (default setting) for connecting IP cameras to the NVR Touch series. It is not recommend that you connect IP cameras via the Internet due to bandwidth issues.
- Page 14 Error code: URI ERR Explanation: The NVR Touch does not support this IP camera. Solution: Please perform a firmware update for this IP camera. Error code: PROFILE ERR Explanation: The H.264 streaming profile might be not opened for the IP camera. Solution: Please enable both H.264 D1 and 1080P both streaming for IP camera.
- Page 15 NVR L Series Multi-Touch Stand Alone Network Video Recorder Specification Models Supports Network camera Network camera Network camera / ONVIF Profile S Input 16CH IP Video Input Resolution CIF / VGA / D1 / 960H / 1M / 1.3M / 1080P / 3M Max.
- Page 16 DISTRIBUTOR： 66-NVR400LOOE-1...