Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Lilin NVR400L
Summary of Contents for Lilin NVR400L
- Page 2 Introduction The LILIN NVR L Series comprises network video recorders that offer a standalone solution for managing IP cameras and systems. The built-in high-quality H.264 decoder can deliver 3MP/1080p/720p/D1/VGA/CIF IP camera streams. Each channel can be individually configured to SD and or HD resolution to suit your needs.
-
Page 3: Trademarks And Registered Trademarks
Page2 Metadata history can be exported to USB devices Supports IPScan utility and LILIN Navigator Trademarks and registered trademarks Microsoft, Windows, Internet Explorer are registered trademarks of Microsoft Corporation in the U.S and/or other countries. Adobe and Adobe PDF are registered trademarks of Adobe Systems Incorporated in the U.S and/or other countries. -
Page 4: Product Overview
LILIN NVR Start Guide Page3 Product Overview Front View 1. Power LED (Yellow) 4. Alarm LED (Red, blinking) NVR power on/off indicator Indicator of triggered alarms 2. LAN LED (Green) 5. USB 2.0 port LAN activity indicator 3. HDD LED (Green, blinking) -
Page 5: Remote Control
LILIN NVR Start Guide Page4 1. RJ-45 Connector 5. USB 2.0 Port 2. VGA Connector 6. DC 12V Input 3. Audio Output 7. Power Switch 4. HDMI Output 8. DI/DO Connector (400L only) Remote control Keys and functions of the remote control are described as followed... - Page 6 LILIN NVR Start Guide Page5 Zoom in Zoom in Move down/tilt down Zoom out Zoom out Move left/pan left Preset Call preset Move right/pan right 0 to 9 Numerical keys Enter/set Touchscreen Swipe to Navigate Pinch to Zoom Pinch to zoom: Put your thumb and index finger together and put them on your touchscreen.
- Page 7 LILIN NVR Start Guide Page6 First Time Using LILIN NVR First, click System in the left pane, where you are allowed to adjust the configurations of the NVR. The details of the tabs are described as followed: General Device ID: Assign an ID for the NVR to be controlled by the remote controller.
- Page 8 LILIN NVR Start Guide Page7 Time Date/Time: Set the date/time of the NVR. Date Format: Modify the date format. Time OSD: Switch on/off the time to be displayed on the screen. Time Zone: Change the time zone of the location where the NVR is installed.
- Page 9 Page8 User LILIN NVR supports up to 15 sets of individual user settings (including administrator, operator, and guest), to which you can assign different access rights. User: Enter the name of the user (this field of administrator, operator, and guest cannot be changed).
- Page 10 LILIN NVR Start Guide Page9 Storage HDD INFO. In HDD INFO., you will see a list of storage devices attached to the NVR with their individual information including the record start time, record end time, and HDD usage, etc. Also, you are allowed to format or defrag any of the devices. Check the device you want to format of defrag, and click Format or File System Defrag.
- Page 11 LILIN NVR Start Guide Page10 USB INFO. Connect a USB device (flash drive or hard drive) to the NVR, and then check the one you want to format under this page, then click Format. Event SYSTEM The search field in this page allows you to search for specific event reports at different time and of different content.
-
Page 12: Network Setup
LILIN NVR Start Guide Page11 You can examine the operating status of different users under this page. Press Download to export the event report. Maintenance Firmware Update: Choose a firmware file and click Update to proceed firmware update. Export Settings: Click Export to save system settings as a configuration file (in XML format). - Page 13 LILIN NVR Start Guide Page12 General Enter the required information in the fields: IP Mode: Select the connection type of the NVR from Static, DHCP, and PPPoE. IP Address: Enter the IP address you want to use, and press IP Test if necessary.
- Page 14 In this page, you are allowed to switch on/off TCP/IP addresses and run the IP Test if necessary. E-Mail When an alarm is triggered, LILIN NVR can automatically send e-mail notifications to the recipients you designated. The setting options are described below:...
- Page 15 LILIN NVR Start Guide Page14 Send E-Mail: Check the box to enable sending e-mail notifications when an alarms is triggered. E-Mail List: The list shows all saved e-mail addresses. Edit Contact: Enter the email address you want to save as contacts and click Modify.
- Page 16 LILIN NVR Start Guide Page15 When an alarm is triggered, LILIN NVR can automatically send snapshots to the FTP server you designated. The setting options are described below: FTP Server: Enter the IP address of the FTP server. Port: Enter the port of the FTP server.
- Page 17 LILIN NVR Start Guide Page16 Camera Check the cameras that you want to send notifications to the FTP when an alarm is triggered, and specify the folder name where the images are saved. DDNS With DDNS, you can access an NVR connected to the Internet through the DDNS URL, whatever the actual IP is.
- Page 18 The IP camera will automatically register to www.ddnsipcam.com. Other LILIN NVR also supports other protocols such as UPnP and SDDP, and related configurations can be modified in the OTHER tab. The setting options are described below: UPnP Device Name: Your device name shown on the UPnP network.
- Page 19 LILIN NVR Start Guide Page18 Workgroup: Your workgroup name displayed in Network Places. Device Name: Your device name displayed in Network Places. IE Default Live View: Choose the default streaming type (H.264 or MJPEG) when streaming using Internet Explorer. Reset on Ethernet Error: Reset the NVR when an Ethernet error is detected.
- Page 20 LILIN NVR Start Guide Page19 General Camera Name: Enter the camera name to be displayed on the streaming screen. Camera Source: Allocate a NVR channel for the camera. IP Address: Enter the IP address of the camera you want to connect to, and press Dev. Info. to check ONVIF capability.
- Page 21 LILIN NVR Start Guide Page20 Sec. Stream Bitrate: Select the bitrate for the secondary stream. Decode Ref.: Select the number of reference frame for the decoder, and choose Immediate for real-time streaming (the video may delay or be fractured) or Smooth for stable streaming.
- Page 22 LILIN NVR Start Guide Page21 saturation, and sharpness. Click Load Default to restore the NVR to its default settings. Click Refresh Image if delay occurs. Press Launch Camera Page to open a separate webpage displaying the camera stream. Note: click Apply for the changes to take effect.
- Page 23 LILIN NVR Start Guide Page22 Play In this tab, you can choose a specific camera and select the date/time information to play the recorded video. Backup Here you are allowed to backup the recorded videos by choosing the time, channel, and format of the backup.
- Page 24 LILIN NVR Start Guide Page23 General Record Mode: Switch on/off scheduled recording. Audio: Switch on/off audio recording. Post-alarm Record: Enable to start recording after an event takes place. Set the time (second) for the NVR to start recording after the alarm is triggered.
- Page 25 LILIN NVR Start Guide Page24 Note: click Apply for the changes to take effect. Advance System Recording Mode: Choose between Manual or Scheduled recording. Overwritten: Switch on to overwrite old files when the storage is full. Pre-alarm Record: Switch On to start recording for a period before an alarm occurs.
- Page 26 LILIN NVR Start Guide Page25 triggered. Buzzer Retain Timer: Set the time period to activate the NVR’s built-in buzzer when an alarm is triggered. Motion Enable: Switch on/off motion detection recording. Remember also to set the motion detection area in the tab Motion Area.
- Page 27 LILIN NVR Start Guide Page26 Alarm On S.M.A.R.T. Error: Turn On to trigger the alarm when an HDD S.M.A.R.T. error is detected. Buzzer: Switch On to activate the buzzer when an alarm is triggered. Note: click Apply for the changes to take effect.
- Page 28 LILIN NVR Start Guide Page27 In this page, you can adjust the NVR’s output of brightness, contrast, saturation, and gain. Click Load Default to restore to the factory default settings. Sequence You are allowed to view videos of multiple cameras in sequence. Check the cameras you want to monitor and choose the number of split views in the drop-down menu in Sequence Mode.
- Page 29 LILIN NVR Start Guide Page28 NVR Cascade This tab allows you to cascade multiple NVRs or adjust relevant settings. For detailed instructions on how to use the NVR cascade function, visit our official website, enter Support > SDK, and download the document named DVR/NVR IR/keyboard serial commands over HTTP. The settings listed in this tab are described in details as followed: Show/Hide: Reveal or hide the password.
- Page 30 Page29 Metadata General LILIN NVR supports various external devices such as GPS or POS, and in this page you are allowed the change the settings for these devices. The setting options are described as followed: Serial Input: Select the USB port to which your external device is connected.
- Page 31 LILIN NVR Start Guide Page30 Server Command Port: Enter the command port of the device. Emulated Mode: Choose an emulation type from the drop-down menu ( see image below). Encoding Mode: Choose between ASCII and UTF-8. Baud Rate: Select an option suitable for your device.
- Page 32 LILIN NVR Start Guide Page31 Event This tab displays a history of detected events. You are allowed to search for events based on time, channel, or content. Other Smartphone This tab provides settings for sending alarm notifications to your smartphone that is paired with the NVR.
- Page 33 LILIN NVR Start Guide Page32 LILIN NVR supports IVS-enabled cameras. Connect an IVS-enabled IP camera to the NVR and turn on the IVS function. Enable Motion Detection in the NVR. Any movement will not trigger the Motion Detection function of the NVR, but will leave a...
- Page 34 DISTRIBUTOR： NVR L 操作手冊...