Appendix B: Programming Lcd Keypads - DSC Power632 Installation Manual

Appendix B: Programming LCD Keypads

If you have an LCD5500Z Keypad, additional programming is required for proper operation. The following is a description of the
available programming options and their accompanying programming sections:
How to Enter LCD Programming
Follow the programming procedure as outlined in Section 4 by pressing [*][8][Installer's Code]. Press the [*] key. Enter the two
digit Section number to be programmed.
Programmable Labels – Sections [01] - [08], [33], [34], [40], [44], [51], [52]
Zone labels and other LCD display identifiers can be customized to make operation of the system easier for the end user. The fol-
lowing procedure should be used for creating all LCD labels:
• Enter Installer's Programming. Enter the Number corresponding to the label to be programmed.
• Use the arrow keys (<>) to move the underline bar underneath the letter to be changed.
• Press the number key [1] to [9] corresponding to the letter you require. The first time you press the number the first letter will
appear. Pressing the number key again will display the next letter. Refer to the following chart:
[1] - A, B, C, 1 [2] - D, E, F, 2
[6] - P, Q, R, 6 [7] - S, T, U, 7
• When the required letter or number is displayed use the arrow keys (<>) to scroll to the next letter.
• When you are finished programming the Zone Label, press the [*] key, scroll to "Save," then press [*].
• Continue from Step 2 until all Labels are programmed.
[01] to [32] Zone Labels (14 Characters)
Default: "Zone 1" - "Zone 32"
Record zone labels on page 30
[33] Fire Alarm Label (14 Characters)
Default: "Fire Zone"
[34] System Label (14 Characters)
Default: "System"
[40] to [44] [*][7][1-2] Command Output Option Labels (14 Characters)
[40] Default: "Command O/P 1"
[44] Default: "Command O/P 2"
[51] Fail to Arm Event Message
Default: "System Has Failed to Arm"
[52] Alarm When Armed Event Message
Default: "Alarm Occurred While Armed < >"
[60] First User Display Mask
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
ON 5
I_______I
ON 6
I_______I
ON 7
I_______I
ON 8
I_______I
[61] Second User Display Mask
Default Option
OFF 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
OFF 5
I_______I
ON 6
I_______I
OFF 7-8
I_______I
46
[3] - G, H, I, 3
[8] - V, W, X, 8
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
ON
Hold [P]anic Keys Prompt ON
Zone Bypassing Prompt ON
Troubles Prompt ON
Alarm Memory Prompt ON
Door Chime Control Prompt ON
Access Codes Prompt ON
User Functions Prompt ON
Output Control Prompt ON
ON
Installer Programming Prompt ON
Stay Arm Prompt ON
Quick Arm Prompt ON
Interior Arm Prompt ON
Quick Exit Prompt ON
View Event Buffer Prompt ON
For future use
[4] - J, K, L, 4 [5] - M, N, O, 5
[9] - Y, Z, 9,0 [0] - Space
OFF
Hold [P]anic Keys Prompt OFF
Zone Bypass Prompt OFF
Troubles Prompt OFF
Alarm Memory Prompt OFF
Door Chime Control Prompt OFF
Access Codes Prompt OFF
User Functions Prompt OFF
Output Control Prompt OFF
OFF
Installer Programming Prompt OFF
Stay Arm Prompt OFF
Quick Arm Prompt OFF
Interior Arm Prompt OFF
Quick Exit Prompt OFF
View Event Buffer Prompt OFF