Motor Exterior; Cleaning Cooling-Water Passages - Yamaha 60F Owner's Manual

90
e
EMU00409

MOTOR EXTERIOR

EMU00410
Cleaning the Outboard Motor
After use, wash the exterior of the out-
board with fresh water.
Flush the cooling system with fresh
water.
NOTE:
Refer to Flushing Cooling System instruc-
tions in "TRANSPORTING AND STORING
OUTBOARD MOTOR".
q
EMU01172
CLEANING COOLING-WATER
PASSAGES
Flushing device equipped model
w
Perform this procedure right after opera-
tion for the most thorough flushing.
1) After shutting off the engine, unscrew
2) Screw the garden-hose connector 2
3) With the engine off, turn on the water
000841
4) When flushing is complete, reinstall
4-27
the garden-hose connector 2 from
the fitting 1 on the bottom cowling.
onto a garden hose 3 which is con-
nected to a fresh-water supply.
tap and let the water flush through
the cooling passages for about 15
minutes. Turn off the water and dis-
connect the garden hose 3.
the garden-hose connector 2 on the
fitting 1 on the bottom cowling.
Tighten the connector securely.
E