Advertisement
Griso V1100
•
Loosen and remove the two screws.
•
Turn the pin and slide out the split pin.
•
Remove the split pin.
•
Remove the pin.
•
Move the pistons apart pushing on the worn pads.
•
Remove one pad at a time.
WARNING
Do not operate the brake lever when the pads
are not in place or the calliper pistons might
come out of their housing, thus causing brake
fluid leakage.
•
Install two new pads, fit them so the holes match those
on the calliper.
WARNING
Always change both pads and ensure that they
are correctly in place inside the calliper.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
GENERAL TECHNICAL INFORMATION
2 - 29
Hide quick links:
Advertisement
Chapters
