MOTO GUZZI Griso Workshop Manual page 158

Griso V1100
•
Fit the dust cover onto the gearbox.
• Secure the dust cover using a new clamp.
•
Fit the reinforcement bar in its seat.
•
Fit the screw.
• Tighten the reinforcement bar nut.
•
Fit the connecting rod to the swingarm.
•
Fit the screw.
•
Tighten the connecting rod nut.
•
Connect the speed sensor connector and secure the
cable with ties.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
TRANSMISSION
8 - 9