Options Menu; Procedure - Midtronics MDX-700P HD Instruction Manual

MDX-700P HD

Procedure

1. Press the MENU button to access the Options Menu.
Use the UP () and DOWN () arrows to move to the line you want to edit.
2.
3. Press the ENTER button to make the highlighted line editable.
Use the UP () and DOWN () arrows to select the character for that cur-
4.
sor location.
5. Press the ENTER button to move to the next location.
6. Press the MENU button to return to the Options Menu.
Option
View/Print
QC Mode
Export Data
Perform Test
Language Selection
Set Address
Time
Date
Counter
Contrast
Temperature Units
Voltmeter

Options Menu

Display the previous test result. Press the PRINT
button to print the results.
A quick test to check battery inventory
Export the last test result to an IR Reader program.
(under development)
Begin the Battery Test procedure.
Select a language for the tester.
(Default: English)
Enter the address to display on the top of the printout.
(Limit: 8 lines, 21 characters per line)
Select 24-hour or AM/PM and set the time. (Default:
AM/PM)
Select the date format as well as set the correct date.
(Default: MM/DD/YYYY)
Clear or display battery and system test by results.
Adjust the contrast setting of the tester display.
(Default: 10)
Select the temperature units
Degrees F or Degrees C
(Default: Degrees F)
Automatically test battery voltage when the clamps are
first connected to the battery terminals. Press ENTER
to continue testing the battery. Press BACK to return to
the menu. (Default: ON)
8
Explanation
www.midtronics.com