CYBEX Onyx User Manual page 12

lubricant! insert always a cloth or a carton in order to leave no oil
stains. please pay special attention to not apply the lubricant on any
other part of the stroller (fabrics, tubes, etc.).
II.-II Applying of the lubricant
a) Rear wheel - Spray from the rear side of the buggy in the space
between the rim and the housing on both sides. let the lubricant get
into the system for approx.
10 seconds, and then turn the wheels.
b) front wheel - Spray in the space between the rim and the housing
on both sides. let the lubricant get into the system for approx.
10 seconds, and then turn the wheels. Should this not avoid the
squeaking, please remove the rim cap and apply the spray on the axle.
c) Suspension - Apply some lubricant between the suspension slider and
the housings.
DISPOSAL
when you are done using your CYBEX onyx/topaz, a proper disposal
is important. Garbage disposal can be different in every country. please
contact your local waste management company to make sure you are
taking the right steps to dispose of the CYBEX onYX/topaz. Always
follow the disposal regulations of your country.
III. INSTRUCTIONS FOR USE
impoRtAnt: READ tHESE inStRuCtionS CAREfullY
BEfoRE uSE AnD kEEp tHEm foR futuRE REfEREnCE.
YouR CHilDREn'S SAfEtY mAY BE AffECtED if You Do
not follow tHESE inStRuCtionS.
ONYx/TOPAz ASSEMbLY INSTRUCTION
Delivery Status
1. Opening The Stroller
a) Release the folding lock lever.
b) open the stroller.
c) push the pedal button down until the locking system is engaged
2. ASSEMbLING THE HANDLES
AttEntion: tHE pinS on BotH SiDES muSt BE EnGAGED.
4
3. ASSEMbLING THE FRONT WHEELS
- fit the front wheels to the end of the frame until they engage with a
"click".
4. ASSEMbLING THE REAR WHEELS
AttEntion: tHE wHEEl SYStEm witH tHE BRAkE pEDAl
muSt BE fittED to tHE RiGHt SiDE of tHE BuGGY
(viEwED fRom BEHinD tHE BuGGY).
AttEntion: tHE pinS on BotH SiDES muSt BE EnGAGED.
EnSuRE tHE BowDEn CABlE iS inSERtED into tHE
ClipS on BotH SiDES.
5. ATTACHING THE bUMPER bAR
a) Slide in latches on left and right side into gadgets sewn into the seat
fabric.
b) press the buttons on left and right side of the bumper bar to take it off.
6. FOLDING THE STROLLER
Remove all contents from the basket. Close the canopy. Remove the
bumperbar.
a) push forward the primary lock lever underneath the pedal button.
b) lift the activated primary lock lever to release the stretching system.
c) push down the secondary lock lever (extended bar on the right side of
the locking system).
d) Grip handles and push forward on the stroller to fold it.
e) press folded stroller until the fold lock is engaged. its recommended to
fasten the harness before folding the stroller.
7. OPENING THE STROLLER
a) Release the fold lock lever.
b) open the stroller
c) push the pedal button down until the locking system is engaged.
wARninG: EnSuRE tHAt All loCkinG DEviCES ARE
EnGAGED BEfoRE uSE.
8. USING THE bRAKES
a) Engage Brake
b) Release Brake