Exposure Mode And Line/Frame Rate - Teledyne HS-40-04k40 User Manual

Piranha HS-xx RoHS User Manual
binning capability of H S-80-08K80-00-R cam era to 1x - 4x binning in the H S-82-04k80-00-R
cam era.

4.3.5 Exposure Mode and Line/Frame Rate

How to Set Exposure Mode and Line/Frame Rate
You have a choice of operating the cam era in one of tw o exposu re m od es. Depend ing on
you r m od e of operation, the cam era's line/ fram e rate (synchronization) can be generated
internally throu gh the softw are com m and
(CC1). When operating in TDI Mod e, it is im portant that the line rate u sed m atches the
w eb speed . Failu re to m atch the w eb speed w ill resu lt in sm earing.
To select how you want the camera's line/frame rate to be generated:
1. You m ust first set the cam era's exposure m od e using the sem com m and . Refer to section
Setting the Exposure Mod e below for d etails.
2. N ext, if using m od e 7, use the com m and
Setting Fram e Rate for d etails.
Setting the Exposure Mode
Purpose:
Syntax:
Syntax Elem ents:
N otes:
Related Com m and s:
Exam ple:
Teledyne DALSA
ssf
or set externally w ith an EXSYN C signal
ssf
to set the line/ fram e rate. Refer to section
Sets the cam era's exposure m od e allow ing you to con trol your
sync and line/ fram e rate generation.
sem m
m
Exposure m od e to use. Factory setting is 7.

Refer to Table 10: Piranha H S Exposure Mod es for a quick list
of available m od es or to the follow ing sections for a m ore
d etailed explanation includ ing tim ing d iagram s.

To obtain the current value of the exposure m od e, use the
gcp
get
com m and or

When setting the cam era to external signal m od es,
EXSYN C m u st be su pplied .

Refer to section 4.5.1 for m ore inform ation on how to
operate you r cam era in TDI or Area Mod e.

Exposure Mod es are saved separately for TDI Mod e and
Area Mod e. Refer to section 4.6 Saving and Restoring
Settings for m ore inform ation on how to save cam era
settings.
ssf
sem 3
sem.
39
03-032-20013-04