Rebooting The Camera - Teledyne HS-40-04k40 User Manual

Piranha HS-xx RoHS User Manual
Loading a Saved Set of Coefficients
Purpose:
Syntax:
Syntax Elem ents:
N otes:
Exam ple:
Resetting the Current Pixel Coefficients
Purpose:
Syntax:
N otes:

4.6.3 Rebooting the Camera

The com m and
and the bau d rate u sed before reboot. Previou sly saved pixel coefficients are also restored .
Teledyne DALSA
Load s a saved set of pixel coefficients for the current d irection . A
factory calibrated set of coefficients is available.
lpc i
i
FPN coefficients set to save.
0 = Factory calibrated pixel coefficients.
1 = Coefficient set one
2 = Coefficient set tw o
3 = Coefficient set three
4 = Coefficient set four

Available in TDI m od e only.

Available only w hen operating the cam era in internal
d irection contol (
d irection control, you m u st sw itch to internal d irection
control, load the coefficient set, and then retu rn to external
d irection contol.
lpc 0
Resets the current pixel coefficients to zero. This com m and d oes not
reset saved coefficients.
rpc
The d igital offset is not reset.
rc reboots the cam era. The cam era starts u p w ith the last saved settings
scd 0 1
or ). When operating in external
71
03-032-20013-04